Molly Leach from Molly’s Artistry Demonstrates Amazing Rings in Acrylic Pouring

  • Artist Spotlight
  • Guide
Posted by Molly Leach from Molly’s Artistry
Molly Leach is a fluid abstract artist who uses a combination of pouring mediums, paints, and designs on her YouTube channel, Molly’s Artistry. Her goal is to share and inspire others through art.
Molly Leach from Molly’s Artistry Demonstrates Amazing Rings in Acrylic Pouring

Table of Contents:

I fell in love with fluid art due to its freeing nature and the controlled chaos of each design. I love that I can be a scientist and an artist all in one. I love many different fluid techniques, although ring pour is one of my favorites.

List of Supplies

Time: 15–20 min     Dry time: 2–3 days     Cure Time: 3–4 weeks

Step-By-Step Demonstration

Step 1: Prepare the Pouring Medium Image short description

I mixed Floetrol, gloss medium, and GAC800 in a ratio of 60/20/20. Stir well.  

Step 2: Prepare the Paint

Image short description

Take some smaller cups and place the paint into each one. I then mix 1 part paint to 1–2 parts pouring medium. The ratio of paint to pouring medium will vary based on the type/brand of paint and the type of pouring medium you are using. 

If there are air bubbles, it is best to let the paints sit until those dissipate as they can change the design of your painting. You can also tap the cup on the table to bring the air bubbles to the top. 

Step 3. Layer the Paints 

Image short description

I like to start with a lighter color at the bottom of the cup. You can choose any color you like. What is layered on the bottom of the cup will end up being what comes out in the center. I also like to layer the colors in contrasting styles to get a more stunning effect. You will pour the first color at the bottom. All of the other colors, you will tilt the cup and pour it down the side. This way each layer sits on top of each other. This is the part you can really have fun with. Experiment with different layering techniques, try different color combinations. The sky is the limit here! 

Step 4. Prepare the Canvas

Image short description

You can use whatever size canvas you like, just make sure that you use enough paint to cover that size canvas. I go by experience now, but you can get an estimate of how much total paint (plus pouring medium) is needed by multiplying length times width (in inches) and dividing by 24-26. This will give a measurement, in ounces, of the approximate total paint mixture needed.  I always like to overestimate a bit so that I have plenty of paint to create the design that I desire. How much paint you need will also vary depending on the depth of your canvas (for coverage of your sides).

To prepare the canvas, I tape off the back for a clean look, as well as make sure the canvas is tight. You can spray the back with water, or you can use shims that are provided with some brands of the canvases to make the canvas taut. You want a canvas that is tight like a drum so that the paint will not move around while drying (unless this is an effect you are going for). 

Step 5: Pour the Paint 

Image short description

Now that you have prepped your canvas and mixed your paints, you are ready to pour! I start in the center of my canvas and move my hand in a circular motion to create the rings. For a regular ring pour you can stay in the center with the circular motion. There are other variations, such as a traveling ring pour, in which you move your hand and the paint in different directions. This is the part of creating art that is unique to each person. You can create whatever design you like! Experiment! That is the fun part! Find what works for you. 

Step 6: Spreading the Paint Image short description

I pick up the canvas and hold it from underneath. I move the paint in a circular motion, really taking care of where the weight of the paint is on the canvas. I then continue to move in a circular motion until all of the paint has covered the canvas. You will want to make sure that all of your edges and corners are also covered. 

Step 7: Finishing Touches Image short description

You will want to pop any additional air bubbles with a torch and make sure to leave in a level place for drying. It will take 1–3 days to dry, depending on the conditions of your space, location, and the mediums that you use. You can also add a protective layer of varnish on the painting after it has cured for a few weeks. 

So that’s how you get lines and rings in a tree-ring pour. It’s very beautiful. I hope you guys will try out the technique! For more tips, techniques, and demonstrations follow me on YouTube, Instagram, and Facebook.  

You can see the technique in action in this video. 

Shop Set for your creation

Website Accessibility Policy

ARTEZA strives to maintain a website that is accessible to all visitors. We recognize that accessibility and usability are not always possible in every area of the website. ARTEZA conducts accessibility reviews of its website and remediates issues uncovered by these audits. Please note our efforts are ongoing. Have feedback or need help? We welcome your feedback on the accessibility of this website. If you have specific questions or feedback about this site's accessibility or need assistance using specific features, please contact us via telephone at (888) 905-0706 or via email at If you need assistance, please identify the specific web page and provide any other relevant information to help us locate the problem to provide you with the content you need. Whenever possible, we will provide the content you need in an alternative format. We welcome your questions about this accessibility statement and comments on how we can improve our website accessibility.